Description
Product details
EXTRA polyester filler is a two component multifunctional paste used for the filling of holes and imperfections in most substrates. EXTRA has been specially formulated for the professional user and combines good filling and smooth spreading properties together with ease of sanding.
Technical data
Mixing Ratio: 100 parts by weight EXTRA polyester filler,
2 parts by weight U-POL hardener for polyester filler.
The exact mixing ratio is not critical, although over or under catalyzation may affect the gel time. Do not greatly over catalyze the paste as this will not significantly speed up the gel time and could lead to bleed through and bleaching problems when over-painting later. Staining may also occure where too little hardener is used.
Pot Life: Once mixed, 4-5 minutes at 20°c with 2% hardener.
Directions of use
EXTRA polyester filler can be used on the following surfaces:-
- Bare metal including Steel, Aluminium and Zinc-coated substrate - degrease and abrade with P80 paper.
- Original paint surfaces (with the exception of thermoplastic acrylics) - degrease and abrade with P180 grit paper.
- GRP - degrease and abrade with P80 grit paper.
Drying Time: Sandable after 20 mins. at 20°c.
Over Painting: EXTRA polyester filler can be over-painted with most paint systems includig 2K. Ideally a full system is recommended including primer.
Hints
The EU limit for this product (product category: IIBb) in ready to use form is 250g/litre.
The VOC content of this product in ready to use form is 100g/litre.
Download safety data sheet
Related products
You may also like
-
In stock
-
In stock
-
In stock
750ml U-Pol TOP STOP Smooth Finishing Stopper
Pack Qty: 1 - In stockAVAILABLE FOR NEXT WORKING DAY DELIVERY * -
In stock
1.1L U-Pol EASY 3 Extra Smooth Finishing Filler
Pack Qty: 1 - In stockAVAILABLE FOR NEXT WORKING DAY DELIVERY * -
In stock
U-Pol ONION BOARD - Multi-Layered Mixing Palette
Pack Qty: 1 - In stockAVAILABLE FOR NEXT WORKING DAY DELIVERY * -
In stock
-
In stock
-
In stock
600ml U-Pol P40 Glass Fibre Repair Paste
Pack Qty: 1 - In stockAVAILABLE FOR NEXT WORKING DAY DELIVERY * -
50g Red Hardener for Polyester Filler
Pack Qty: 1 - Available to OrderDELIVERY: 10 - 15 WORKING DAYS -
In stock
-
In stock
450ml Clear GRIP4 - Universal Adhesion Promoter
Pack Qty: 1 - In stockAVAILABLE FOR NEXT WORKING DAY DELIVERY * -
4m x 150m Overspray Masking Film on Roll
Pack Qty: 1 - Available to OrderDELIVERY: 10 - 15 WORKING DAYS
Other people also viewed
Customers Also Viewed
-
In stock
-
4.8 x 18 Standard Dome Head Pop Rivets
Pack Qty: 200 - Available to OrderDELIVERY: 7 - 10 WORKING DAYS -
Chemical Fully Stocked Absorbent Station
Pack Qty: 1 - Available to OrderDELIVERY: 7 - 10 WORKING DAYS -
50L Chemical Absorbent Refill pack for Shoulder Bag
Pack Qty: 1 - Available to OrderDELIVERY: 7 - 10 WORKING DAYS -
3/4 Dr Female - 1 Dr Male Impact Adaptor
Pack Qty: 1 - Available to OrderDELIVERY: 3 - 5 WORKING DAYS -
26in 650mm Hook Type 12x4 9x4 Wiper Blade
Pack Qty: 1 - Available to OrderDELIVERY: 7 - 10 WORKING DAYS -
In stock
-
6.3mm TOPline Silver 338 HSS Sp Drill
Pack Qty: 10 - Available to OrderDELIVERY: 10 - 15 WORKING DAYS