Part no. 610253

2.25L U-Pol P38 Super Body Filler

Pack qty: 1 - In stock

AVAILABLE FOR NEXT WORKING DAY DELIVERY *

Success

Item added to basket. Click here to view basket.

Remember to sign in to view your United Industrial Account.

Don't have a United Industrial Account? Sign up today!

Please select a size from above to proceed.

Volume: 2.25L

Combination Not available

Qty

Success

Item added to basket. Click here to view basket.

Remember to sign in to view your United Industrial Account.

Don't have a United Industrial Account? Sign up today!

Please select a size from above to proceed.

Description

Product details

ISOPON P38 polyester filler is a two component chemical paste used for the filling of holes and imperfections in surfaces such as steel and GRP.
ISOPON P38 has been specially formulated for the professional user and combines good filling and smooth spreading properties together with ease of sanding.

Technical data

100 parts by weight ISOPON P38 polyester filler,
2 parts by weight ISOPON BPO hardener for polyester filler.
The exact mixing ratio is not critical, although over or under catalyzation may affect the gel time. Do not greatly over catalyze the paste as this will not significantly speed up the gel time and could lead to bleed through and bleaching problems when over-painting later. Staining may also occure where too little hardener is used.
Pot Life: Once mixed, 5 - 6 mins. at 20°c with 2% hardener.

Directions of use

ISOPON P38 polyester filler can be used on the following surfaces:-
- Bare steel, degrease and abrade with P80 paper.
- Original paint surfaces (with the exception of thermoplastic acrylics) degrease and abrade with P180 grit paper.
- GRP degrease and abrade with P80 grit paper.

Hints

The EU limit for this product (product category: IIBb) in ready to use form is 250g/litre.
The VOC content of this product in ready to use form is 100g/litre.

Download safety data sheet