Part no. 610243

1L U-Pol B Glass Fibre Bridging Compound

Pack qty: 1 - In stock
AVAILABLE FOR NEXT WORKING DAY DELIVERY *
Success
Item added to basket. Click here to view basket.
Remember to sign in to view your United Industrial Account.
Don't have a United Industrial Account? Sign up today!
Please select a size from above to proceed.
 1L
Combination Not available
Success
Item added to basket. Click here to view basket.
Remember to sign in to view your United Industrial Account.
Don't have a United Industrial Account? Sign up today!
Please select a size from above to proceed.

Description

Product details

U-POL B polyester glass fibre filler is a two component chemical paste used for the bridging of holes and rust in surfaces such as steel and GRP.
U-POL B form a very hard durable surface and can be sanded and shaped if required. It is easily covered with standard polyester filler or can be over-painted directly.


Technical data

100 parts by weight U-POL B polyester filler,
3-4 parts by weight U-POL BPO hardener for polyester filler.
The exact mixing ratio is not critical, although over or under catalyzation may affect the gel time. Do not greatly over catalyze the paste as this will not significantly speed up the gel time and could lead to bleed through and bleaching problems when over-painting later. Staining may also occure where too little hardener is used.
Pot Life: Once mixed, 5 - 6 mins. at 20°c with 4% hardener.


Directions of use

U-POL B polyester filler can be used on the following surfaces:-
- Bare steel, degrease and abrade with P80 paper.
- Original paint surfaces (with the exception of thermoplastic acrylics) degrease and abrade withP180 grit paper.
- GRP degrease and abrade with P80 grit paper.
Drying Time: Sandable after 20 mins. at 20°c.
Over Painting: U-POL B polyester glass fibre filler can be over-painted with most paint systems including 2K.
Ideally a full system is recommended including primer.
Drying Time: Sandable after 20 mins. at 20°c.
Over Painting: ISOPON P38 polyester filler can be over-painted with most paint systems including 2K.
Ideally a full system is recommended including primer.


Hints

The EU limit for this product (product category: IIBb) in ready to use form is 250g/litre.
The VOC content of this product in ready to use form is 100g/litre.


Download safety data sheet

Related products

You may also like

Other people also viewed

Customers Also Viewed